Avaya J100 Series - Page 306

Parameter name Default value Description
BLF_INCOMING_CALL_INDICATION 3 Specifies the indication
type for a BLF incoming
call.
Valid values:
• 0 - None (no alerting for
BLF incoming calls).
• 1 - Audible (only audible
alerting for BLF
incoming calls).
• 2 - Visual (only visual
alerting for BLF
incoming calls).
• 3 - Default (the behavior
isl based on
BLF_INCOMING_CALL
_INDICATION_MODE
parameter value).
• 4 - Both (both audible
and visual alerting for
BLF incoming calls).
Note:
This parameter is
supported only in the
3PCC environment.
Avaya J129 IP Phone
does not support this
feature.
Table continues…
Customizable parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 306
Comments on this document? infodev@avaya.com