Avaya J100 Series - Page 459

Parameter name Default value Description
SOFTKEY_ACTIVE Null Specifies DTMF attributes
and soft key labels which
a phone displays during
an active call, in addition
to standard active call
softkeys.
Valid value is a string of
DTMF attributes,
separated by semicolons,
with no spaces. For
example:
SET SOFTKEY_ACTIVE
"type=dtmf;action=##*3
;label=Park"
ADD SOFTKEY_ACTIVE
"type=dtmf;action=*34;
label=Record"
Type value can only be
DTMF. The following
symbols are allowed for
action: 0-9 * and #. Any
UNICODE symbols are
allowed for action, except
the following: (;",<>/&).
You must keep the
sequence of attributes the
same as in example.
Use the ADD command to
configure up to 10
softkeys in the
46xxsettings.txt file. If you
use several SET
commands, the last one
overrides the previous
ones.
Table continues…
List of configuration parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 459
Comments on this document? infodev@avaya.com