Avaya J100 Series - Page 471

Parameter name Default value Description
TLSSRVRID 1 Specifies how a phone
evaluates a certificate
trust.
Value operation:
• 0: Identity matching is
not performed.
• 1: The certificate is
trusted only if the identity
used to connect to the
server matches the
certificate identity, as per
Section 3.1 of RFC
2818. For SIP-TLS
connections, an
additional check is
performed to validate the
SIP domain identified in
the certificate, as per
RFC 5922. The
parameter is configured
through the
46xxsettings.txt
file.
TPSLIST
Null Specifies a list of URI
authority components
(optionally, including
scheme and path
components) to be trusted.
A URI received in a push
request is only used to
obtain push content, if it
matches one of these
values.
The list can contain up to
255 characters.
Values are separated by
commas without any
intervening spaces.
If the value of TPSLIST is
null, push is disabled.
Table continues…
List of configuration parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 471
Comments on this document? infodev@avaya.com