Avaya J100 Series - Page 502

Element
name
Attributes and values Description
<do>
The following attributes are supported:
• type: a mandatory attribute. Specifies
the type of the <do> element.
The following values are allowed:
-
accept
-
delete
-
help
-
options
-
prev
-
reset
-
unknown
• label: specifies a label for the <do>
element.
If this attribute is not specified, the
default value of the label attribute is
based on the type attribute value, i.e.,
Accept, Delete, Help, Options,
Back (prev), Refresh (Reset),
Unknown.
• name: specifies a name for the <do>
element.
•
style
A WML element used to associate a UI
element to a certain task.
The <do> element can be used to specify soft
keys additional to default soft keys.
Note:
In Input mode, the Edit soft key is added
to empty locations.
If no <do> elements are specified, the default
soft keys are rendered (the order of list items
corresponds to four soft key labels from left to
right):
• empty
• Home
• Refresh
• Exit
If one <do> element is specified, it is
displayed on the leftmost soft key and the
default soft keys are shifted to the right:
• first <do>
• Home
• Refresh
• Exit
If two <do> elements are specified, they are
displayed as follows:
(Page 1 soft keys)
• first <do>
• second <do>
• empty
• More
(Page 2 soft keys)
• Home
• Refresh
• Exit
• More
Table continues…
Customizable parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 502
Comments on this document? infodev@avaya.com