Avaya J189 - Sending a multicast page; Pre-configuration of keys; SLA Mon

Sending a multicast page1
About this task2
You can send a multicast page to a group of users by activating the Multicast Paging group on the 3
Phone screen. If the required group is not added on this screen, you can access all multicast page 4
groups configured for your phone in the Features menu.5
Procedure6
1. Do one of the following:7
• Lift the handset.8
• Press Speaker.9
• Press Headset.10
2. (Optional) If you use the handset, press End Call to cancel dialing.11
3. On the Phone screen, scroll to the required multicast page group, and press Select.12
The phone displays the Paging <group name> box.13
4. To end the multicast page, do one of the following:14
• Press End Call.15
• If you use the handset as an audio device, hang up.16
Pre-configuration of keys17
With the Pre-configuration of keys feature, the Phone screen displays a pre-determined set of 18
phone keys for accessing features, applications, and line appearances. Using this feature, you can 19
add and access the phone extensions for auto-dialing.20
Your system administrator does the phone configuration, and you cannot change the mapping or 21
labels of pre-configured keys.22
Contact your system administrator if you need to replace, move, or relabel the pre-configured 23
keys.24
SLA Mon
™
25
SLA Mon
™
technology is a patented Avaya technology embedded in Avaya products to facilitate 26
advanced diagnostics. The phones supports Avaya Diagnostic Server with SLA Mon
™
agent.27
Pre-configuration of keys
October 2022 Using Avaya J189 SIP IP Phone in Avaya Aura
®
107
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT—October 5, 2022—8:17 AM (UTC+00:00)