6. Press one of the following:1
• Replace: To replace the contact with another contact.2
• Clear: To remove the contact from the Speed Dial.3
7. Press Replace or Clear when the phone prompts for confirmation.4
Setting Mute alert5
About this task6
Use this procedure to receive a notification alert when your phone is on mute, and you try to talk 7
on a call.8
Before you begin9
Ensure that your administrator enables the feature. Contact your administrator for details.10
Procedure11
1. Press Main Menu.12
2. Scroll to Settings and press Select.13
3. Scroll to Phone and press Select.14
4. Scroll to the Mute alerting option.15
5. Press Toggle to select one of the following:16
• Audible: The phone plays an error beep.17
• Visual: The phone displays a mute icon on the top bar of the screen.18
• Both: The phone beeps and displays a mute icon.19
• None: The phone disables the mute alert.20
6. Press Save.21
Visual alerting22
The beacon LED works in the following manner to indicate incoming calls and messages:23
• If there is an incoming call, the beacon LED blinks.24
• If there are new voice mail messages, the beacon LED is lit continuously.25
• If the speaker is on during an active call and there are new voice mail messages, the beacon 26
LED turns off every 15 seconds.27
• If the call is on hold, the beacon LED stops flashing.28
Setting Visual alerting29
About this task30
The phone illuminates the beacon LED when there are incoming calls and messages. Use this 31
procedure to enable the visual alerting.32
Customization
October 2022 Using Avaya J189 SIP IP Phone in Avaya Aura
®
118
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT—October 5, 2022—8:17 AM (UTC+00:00)
To Next Page
Loading...
