You can also press the Phone button to display possible action.1
Important:
Do not log your telephone off during failover or until normal service is restored on your 2
original telephone server. Logging off during failover, during transition to or from an alternate 3
server, or while your phone is active on an alternate server may cause your phone to become 4
inoperable.5
The following conditions apply when your telephone is in Failover mode:6
• If you are on a call when failover occurs, the call will remain active. You cannot initiate new 7
calls while your phone transitions to the alternate server.8
• Certain soft keys may not display and their related functions may be unavailable until 9
transition to the alternate server is complete.10
• Call connection may take longer than usual.11
• During the transition to a new server, any active conference calls, call transfers, and held 12
calls may be dropped. Incoming calls might not reach you and can go to voice mail.13
• Emergency calls might or might not work, depending on the stage of failover and the 14
functionality available on the alternate server.15
• The Message Waiting Indicator is cleared, but voice mail might still be available if the voice 16
mail server to which calls are being sent is not in failover.17
• Transitions back to the normal server will restore all original functionality.18
Recording audio parameters19
About this task20
Use this procedure to record audio parameters information in your phone.21
Note:
The saved audio parameters information is used for audio debugging.22
Procedure23
1. Press Main Menu.24
2. Scroll to Network information and press Select.25
3. Scroll to Audio parameters and press Select.26
4. Press the Record soft key.27
5. To stop the recording, press the Stop soft key.28
Maintenance
October 2022 Using Avaya J189 SIP IP Phone in Avaya Aura
®
150
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT—October 5, 2022—8:17 AM (UTC+00:00)
To Next Page
Loading...
