Avaya J189 - Turning Error Tones on and off; Enabling Wireless Headset Bidirectional Signaling; Selecting a Headset

Turning error tones on and off1
About this task2
Use this procedure to activate the error tone alarm when you perform an incorrect action while 3
using the phone.4
Procedure5
1. Press Main Menu.6
2. Scroll to Settings and press Select.7
3. Scroll to Audio settings and press Select.8
4. Use the Down Arrow key to go to the Error tones screen.9
5. To turn error tones on or off, press Toggle.10
6. Press Save.11
Enabling wireless headset bidirectional signaling12
Before you begin13
Check if the headset supports electronic hook switch (EHS) signaling.14
Note:
Headset Signaling setting is used to configure only DECT headsets and cannot be applied to 15
Bluetooth headsets.16
Procedure17
1. Press Main Menu.18
2. Scroll to Settings and press Select.19
3. Scroll to Audio settings and press Select.20
4. Scroll to Headset signaling.21
5. Press Toggle to select one of the following options:22
• Disabled: Disables signaling from the phone to the headset.23
• Switch hook and alert: Activates the link to the headset if you press Headset. When 24
the phone receives an incoming call you hear the alert tone in the headset.25
• Switch hook only: Activates the link to the headset if you press Headset. When the 26
phone receives an incoming call you do not hear the alert tone in the headset.27
6. Press Save.28
Selecting a headset29
About this task30
Use this procedure to select a headset option for working with the phone. You can select the 31
following headsets: Wired, USB or Bluetooth.32
Customization
October 2022 Using Avaya J189 SIP IP Phone in Avaya Aura
®
130
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT—October 5, 2022—8:17 AM (UTC+00:00)