Avaya J189 - Pairing a Bluetooth enabled headset with your phone

• Right Arrow key: To enable Bluetooth.1
• Left Arrow key: To disable Bluetooth.2
Note:
For some Bluetooth headsets, volume can be adjusted during the first call after 3
rebooting the phone. Toggle the slider of the pop-up panel to the right to increase 4
the volume, and to the left to decrease it.5
Pairing a Bluetooth enabled headset with your phone6
About this task7
You can pair a maximum of ten Bluetooth enabled headsets with the phone, but you can use only 8
one headset at a time. The phone displays the list of available devices and paired devices.9
Before you begin10
• Ensure the wireless module is installed in your phone.11
• Ensure that your administrator enables the feature.12
• Ensure your Bluetooth headset is in pairing mode.13
Procedure14
1. Press Main Menu.15
2. Scroll to Settings and press Select.16
3. Scroll down to Bluetooth and press Select.17
4. Scroll to Devices and press Select.18
The phone scans and displays the list of Bluetooth enabled devices.19
5. To pair a device, scroll to the headset and press Pair.20
6. To disconnect a paired headset, under Paired devices, press Disconct.21
7. To unpair a paired headset, under Paired devices, press Forget.22
Turning button clicks on and off23
Procedure24
1. Press Main Menu.25
2. Scroll to Settings and press Select.26
3. Scroll to Audio settings and press Select.27
4. Use the Down Arrow key to go to the Button clicks screen.28
5. Press Toggle to turn the audio on or off.29
6. Press Save.30
Audio
October 2022 Using Avaya J189 SIP IP Phone in Avaya Aura
®
129
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT—October 5, 2022—8:17 AM (UTC+00:00)