Procedure1
1. Press Main Menu.2
2. Scroll to Settings and press Select.3
3. Scroll to Display and press Select.4
4. Scroll to Screen saver and press Select.5
5. Scroll to Primary display, and press Select.6
6. Scroll down to the new image.7
7. To preview the image, press Preview and then Back.8
8. Press Select.9
9. Press Save.10
Setting the screen saver image of the JEM24 module display11
About this task12
Use this procedure to set a pre-defined screen saver image for the Avaya J100 Expansion Module 13
(JEM24) display of the phone. You can set a screen saver image, if your administrator enables the 14
feature. To set a custom image, contact your system administrator.15
Before you begin16
Ensure that your administrator enables access to change the screen saver image.17
Procedure18
1. Press Main Menu.19
2. Scroll to Settings and press Select.20
3. Scroll to Display and press Select.21
4. Scroll to Screen saver and press Select.22
5. Select Module display and press Select.23
6. Scroll to the required image.24
7. (Optional) To preview the image, press Preview, and then press Back.25
8. Press Select.26
9. Press Save.27
Changing the screen saver for the secondary display28
Procedure29
1. Press Main Menu.30
2. Scroll to Settings and press Select.31
3. Scroll to Display and press Select.32
Display
October 2022 Using Avaya J189 SIP IP Phone in Avaya Aura
®
137
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT—October 5, 2022—8:17 AM (UTC+00:00)
To Next Page
Loading...
