Avaya J189 - Chapter 6: Outgoing calls; Making a call by using the manual dial mode

Chapter 6: Outgoing calls1
Making a call by using the manual dial mode2
About this task3
In a manual dial mode, you can edit the dialed input and initiate a call using the current dialed 4
string. When you initiate a call, there is no dial tone, and no time out for completing the dialed 5
string.6
Procedure7
1. Do one of the following:8
• Lift the handset.9
• Press Speaker.10
• Press Headset.11
2. Dial the number, and press the Call soft key or OK button.12
If your system administrator enables the digit mapping feature, the phone automatically 13
corrects the wrongly dialed numbers or prevent you from dialing certain numbers.14
Related links15
Setting the dialing mode on page 11516
Making a call by using the auto-dial mode17
About this task18
In an auto-dial mode, when you initiate a call by off-hook, you hear a dial tone until you press any 19
digit from the dial pad. You can edit a partially entered dialed input after initiating a call. You hear 20
a DTMF feedback tone for the digits pressed on the dial pad. The phone automatically places the 21
call when it detects that the dialing string is complete or when there is a time out.22
To initiate a call quickly, you can press the # key to indicate the end of the dial, and the phone 23
places the call.24
Procedure25
1. Do one of the following:26
• Lift the handset.27
October 2022 Using Avaya J189 SIP IP Phone in Avaya Aura
®
41
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT—October 5, 2022—8:17 AM (UTC+00:00)