PAGE 24
Windows PC Software
Please note also the Release Letter that will inform you about the latest
functions and about the corrected bugs.
Please press under Software Updates the MAGIC DC7 & AC1/XIP
1
button.
Subsequently the setup programm is executed.
Alternatively, you can install the software directly from the CD. You will find
the installation file setup.exe in the folder Software\MAGIC DC7 & AC1 -
XIP on the CD.
Please follow the instructions of the installation routine.
After the installation the software can be started by clicking on the MAGIC
DC7, AC1 & AC1 XIP symbol on the desktop.
Connect the system via the LAN interface with your network. If you do not
have a network you can also connect the unit to your PC directly via a so cal-
led cross over network cable.
Alternatively, you have also the possibility to connect your PC with the sy-
stem via a serial 1:1 cable (only PIN 2 and PIN 3 are used, PIN 5=ground) by
the adapter cable (plug data 1/use PC).
Setting a LAN or a COM interface is discribed below (see CHAPTER4.7.1,
Page 41).
4.4 Software update from the internet
Software updates can be downloaded from our homepage
http://www.avt-nbg.de
free of charge. Please go to our Service section on our webpage and select
Software Download. Under MAGIC Audio Codecs please download the file
with the order number 490196. When the download is completed, execute
setup and follow the instructions.
In addition to the PC Software , the setup also includes the Firmware for the-
system. If it also has to be updated, the MAGIC DC7 & AC1 XIP Software dis-
plays an error message when it is started. The instructions for a Firmware up-
date are described in CHAPTER 4.8.6, Page 95.
1
If you have the optional MAGIC DC7 & AC1/XIP LAN license (Id-Nr. 430260), please install the
MAGIC DC7 & AC1/XIP LAN version.
To Next Page
Loading...
