What to do if the AVT MAGIC Conference System MAGIC DC7/AC1 keypad displays nothing?
If the external MAGIC DC7/AC1 keypad isn't displaying anything, first press the AC button on the keypad. If nothing appears, disconnect the keypad from its power supply for a minimum of 5 seconds, then reconnect it. Check if you've entered the correct baud rate.
General| Category | Conference System |
|---|---|
| Current Consumption | 5 mA |
| Microphone Type | Condenser |
| Connection Type | XLR |
| Frequency Response | 50Hz |
Rules to minimize residual risk during transport, storage, and operation.
Overview of the system's ISDN, X.21, and LAN interfaces and signal processing capabilities.
Feature for synchronizing audio signals with remote codecs automatically.
Minimum PC specifications needed to run the software.
Steps to install the software from the CD-ROM.
How to download and install software updates from the manufacturer's website.
Description of the main window and connection status indicators.
Activating and configuring remote control for the system via software.
Information on how to find and download free software updates.
Contact details for technical support via phone and email.
Instructions and address for sending defective units for repair.
To Next Page
