baxter Hillrom Progressa - Page 65

Graphical Caregiver Interface (GCI) Controls
Hillrom Progressa ICU Hospital Bed Instructions for Use (171528 REV 15) 53
Verify the Patient Identity
NOTES:
• The first time that you verify a patient, the full name and date of birth will show on the screen.
After that, the name will be encoded per the Health Insurance Portability and Accountability
Act (HIPPA).
• The date of birth is shown as month (two-digit), day (two-digit), and year (four-digit).
At the Patient Identity screen, you have these options:
• Ye s —press this control if the patient identity shown
is correct. The Home screen will show with the
Room Associated and Patient Verified icons.
• No—press this control if the patient identity shown
on the screen is not correct. The Patient ID Issue
screen will show to let you know that a different
patient is assigned to the room through the Admit,
Discharge, Transfer (ADT) system. Press OK. The
Home screen will show with the Room Associated
and No Patient icons.
• Cancel—press this control if you no longer want to verify the patient identity. The Home
screen will show with the Room Associated and No Patient icons.
NOTES:
• If a different patient has been assigned to the room
through the ADT system, the Patient ID Issue screen
will show. Press OK. The Home screen will show
with the Room Associated and No Patient icons.
• If the patient has not been assigned to the selected
room through the ADT system, this Patient ID Issue
screen will show. Press OK. The Home screen will
show with the Room Associated and No Patient
icons.