44 BD High Throughput Sampler User’s Guide
Rearranging Samples on the Plate
Rearrange samples and wells in the plate layout by using the Cut, Copy, and
Paste functions. Note that specimens and wells cannot be overwritten.
• You can move specimens to different locations in the plate layout as long as
there is room to accommodate the entire specimen.
• You can move wells within a specimen to change the acquisition order or
move wells from one specimen to another. Wells are pasted either below or
to the right of the selected well, depending on the orientation of the Add
Well button.
Assigning Keywords
You can create and assign keywords at the experiment or well level. For
information on creating experiment keywords, refer to the BD FACSDiva
Software Reference Manual. For instructions on creating and assigning keywords
at the well level, see Assigning Keywords on page 77.
Setting Recording Rules
You can alter the acquisition stopping criteria for a selected well by:
• changing the Sample Flow Rate and Sample Volume in the HTS tab of the
Well Inspector
• changing the Events to Record in the Experiment Layout or Acq tab of the
Well Inspector
For information on acquisition stopping criteria, see Running Samples
Automatically in Sequence on page 46 and Running Wells Manually on page 47.
To Next Page
Loading...
