Chapter 2: BD FACSDiva Software Overview 45
Applying an Analysis Template
You can apply an Analysis template to selected samples or wells. First select the
well, then:
• choose Edit > Apply Analysis Template in the menu bar
or
• right-click to select Apply > Analysis Template in the shortcut menu.
For instructions on how to save an Analysis template, see Exporting an
Experiment as a Template on page 84.
Applying HTS Settings
Apply specific HTS settings to a well or group of wells by using the Copy/Paste
Loader Settings commands in the shortcut menu.
Copying and Pasting Cytometer Settings
You can copy and paste cytometer settings from one specimen or well to another
as long as the specimen or well that you are copying from has cytometer settings.
You can copy and paste cytometer settings to and from unrecorded wells only.
To copy settings from one specimen to another, click to select the specimen in the
specimen list (see Figure 2-2 on page 32), then right-click the selected specimen
on the plate and choose Copy Cytometer Settings. Select the specimen you wish
to copy to in the specimen list, then right-click the selected specimen on the plate
and choose Paste Cytometer Settings.
To copy settings from one well to another, click to select the well, then right-click
it and choose Copy Cytometer Settings. Select the well you wish to copy to, then
right-click it and choose Paste Cytometer Settings.
To Next Page
Loading...
