Chapter 2: BD FACSDiva Software Overview 53
Analyzing Plate Data
Analyze plate data the same way you would analyze tube data. For detailed
information, refer to the BD FACSDiva Software Reference Manual.
Performing Batch Analysis
Use the batch analysis feature to automatically advance a selected set of data for
multiple wells through an analysis template on a global worksheet. You can also
assign a preferred global worksheet to a specimen or individual wells using the
Inspector. You can set up batch analysis to pause between each data file and to
print a copy of the analysis before proceeding with the next well.
NOTICE To perform batch analysis, you must view data using a global
worksheet.
For an example of setting up and performing batch analysis, see Performing
Batch Analysis on page 90.
To Next Page
Loading...
