Resetting MC6-T - 149
Note: While transporting in the field, set the unit's handle to
carrying position (see section MC6-T Handle) and treat the
device with extra care.
For further information, contact Beamex. Contact information is on the
prepages of this manual .
Resetting MC6-T
Sometimes you may want to reset/restart the calibrator. To do that, press
and hold the Home and Enter keys for 7 seconds.
Note: MC6-T does not lose time, date or saved data during the
reset. It just resets the main processor. Possible open files may
however be lost.
To Next Page