- 59
Tools
MC6-T has Tools buttons in the lower left corner of certain subwindows.
The lists in the following subchapters present available tools. Certain
tools are available for measurements only and others for generations/
simulations only.
Figure 47: Tools button
Note: The available tools also depend on the selected Quantity
and Function, e.g. Switches have limited amount of tools.
Several tools have a "Stop" button in the pop-up window the
Tool is configured in. To stop, e.g. Damping, open the Damping
configuration window and tap the "Stop" button. Then MC6-T
reverts to default damping settings.
Changing the Quantity of a subwindow reverts all Tools, except
Additional Info settings, to their default settings for that particular
Quantity.
In Calibrator window: the additional info fields with black text
may be zeroed "on the fly". Zeroing options are available in
Additional Info window's menu.
To Next Page