Unpacking and Inspection - 9
Typographical Conventions
The following typographical conventions apply to the MC6-T User Manual:
Bold text is used in following situations:
• References to User Manual topics and parts,
• MC6-T keywords, i.e. terms shown in the User Interface and
• other keywords, e.g. the names of fieldbus parameters.
Note: This is a note. Notes typically inform you of something
useful concerning the current topic.
CAUTION: This is a caution. Whenever you see a caution, read
it carefully and take it seriously. By not observing cautions, you
may damage the calibrator.
Warning: This is a warning. Whenever you see a warning, read
it carefully and take it seriously. By not observing warnings, you
may -at worst- damage the calibrator and/or even risk your life.
Unpacking and Inspection
At the factory each new MC6-T passes a careful inspection. It should
be free of scrapes and scratches and in proper operation order upon
receipt. The receiver should, however, inspect the unit for any damage
that may have occurred during transportation. If there are signs of obvious
mechanical damage, package contents are incomplete, or MC6-T does not
operate according to specifications, contact the purchasing sales office as
soon as possible.
If you have to return the device to the factory for any reason, use the
original packing whenever possible. Include a detailed description of
the reason for the return. Read also chapter Service and transportation
instructions, section Safe delivery for service.
For a description of available options, see Options.
To Next Page
Loading...