Safety Precautions and Warnings - 13
Safety Precautions and Warnings
CAUTION: Read and fully understand this manual and all
other safety instructions before operating this Multifunction
Temperature Calibrator and Communicator.
CAUTION: Only qualified and trained personnel is allowed to
use the MC6-T.
Working with MC6-T involves the usage of temperature,
electrical and pressure instruments. Only personnel with good
experience and knowledge of high temperature media, high
temperature instruments and connections are allowed to work
with the Temperature Block. Incorrect use may result in
damage to the device and/or personal injury.
Warning: Do not use MC6-T in any other way than as
described in thisUser Manual. If this equipment is used in
a manner not specified by the manufacturer, the protection
provided by it against hazards may be impaired.
Warning: To ensure safe use of the MC6-T follow these rules:
• Mains cord of correct type and rating must be used. The
Mains cord of the calibrator is equipped with a grounding plug
for your protection against electrical shock hazards. It must be
plugged directly into a properly grounded receptacle.
• Always make sure that mains inlet socket is easy to reach in
case the Mains cord needs to be unplugged. It is located at
the front of the device for maximizing safety.
• The device must always be used in upright standing position.
• Free space must be ensured around the calibrator. 25 cm is
required on all sides and 1 m above the calibrator to allow
correct ventilation.
Warning: Use MC6-T only if you are certain of that it can be
used safely. Safe use of MC6-T is no longer possible if one or
more of the following cases are true:
• When the enclosure of MC6-T is evidently damaged
• When MC6-T is not functioning as expected
• When there is unusual smell emitted by the battery of the
device
• After prolonged storage in unfavorable conditions
• After serious damage during transport
To Next Page