About Temperature Calibrator - 67
Temperature Calibrator
Things discussed in this chapter:
• MC6-T's Temperature Calibrator for calibration of temperature
instruments and sensors
About Temperature Calibrator
Temperature Calibrator operational mode has been optimized for
temperature calibrations. Any supported RTD and thermocouple sensor
may be calibrated as well as any temperature instrument if the output
signal can be read by MC6-T. Up to three instruments may be calibrated
simultaneously.
Figure 50: Home View with Temperature Calibrator selected
Note: Keyed output is not supported in Temperature Calibrator.
Temperature Calibrator requires that the Mains switch is on.
To Next Page