Warnings Concerning Pressure - 17
Warning:
Always depressurize the system before opening or connecting
any pressure fittings or connectors. Use proper valves for
venting the system. Ensure that all connections are made
correctly and that the hose and the connectors are intact.
External pressure modules have the allowed media printed on
the module's sticker. Using unsuitable pressure media may
destroy the pressure module/calibrator.
Warning: External Pressure Modules: Use only the pressure
media stated on the pressure module. Use of wrong type of
Pressure Media may destroy the pressure module.
Never exceed the maximum pressure of a pressure module. The
maximum pressure of external modules is stated on module's
sticker and mentioned in the Instruction Booklet that is provided
with the external module.
Never plug a hose with your hands or put hands in front of a
gas spray coming from a leakage. A gas bubble in the blood
circulation can cause death.
Warnings Concerning High Pressure
Warning: High pressure is always dangerous. Only personnel
with good experience and knowledge of high pressure liquid, air
and nitrogen operations are allowed to work with the module.
Read carefully all these instructions and familiarize yourself
with local safety instructions for high pressure operations before
starting the use.
When using gas, the system must not contain any liquid,
especially if you do not know how they may react under
pressure. Use of clean air or nitrogen is recommended as
gaseous pressure media. Liquid pressure media should be
preferred when using modules with a pressure range of 60 bar
(30000 psi) or more.
To Next Page