General - 73
Documenting Calibrator
Things discussed in this part:
• An introduction to calibration
• How to calibrate instruments using MC6-T's Documenting Calibrator
• How to view calibration results
• How to read instrument data from devices using digital communication.
General
MC6-T's Documenting Calibrator is a more advanced tool than the
"plain" Calibrator that is also available in MC6-T.
Configurations of the instruments to be calibrated may be received from
calibration software communicating with MC6-T. Alternatively, instruments
may be created in MC6-T itself.
Figure 57: Home View with Documenting Calibrator selected
Documenting Calibrator saves instrument data and presents it in a list.
Instrument data consists of input and output quantities and ranges as
well as other data that defines the instrument. Starting to calibrate an
instrument is fast, since all the required data can be used immediately.
To Next Page
Loading...