32 - General description
PC Communication/Calibration software
Beamex CMX Calibration Software supports MC6-T from version V2,
revision 2.12 onwards and also in Beamex LOGiCAL, version 2, a cloud
based calibration management software.
USB Communication Driver
MC6-T uses Windows' generic USB driver (WinUSB) provided by
Microsoft. Supported operating systems: Windows
®
8 and newer.
MC6-T Related Tools Available for Personal Computer
The following tools are available for download at Beamex's web site:
https://www.beamex.com. Look for Download Center and Software tools
for MC6 family.
• Beamex MC6 Data Log Viewer, for transferring Data Log results to a
PC and viewing them on the PC.
• Beamex MC6 Device Description Installer, for installing new Device
Descriptions of smart transmitters from the PC to MC6-T.
• Beamex MC6 Fieldbus Configuration Viewer, for downloading smart
transmitter configurations into the MC6-T and then to the PC.
• Beamex MC6 Remote Controller, for controlling MC6-T via the PC.
To Next Page
Loading...