BEAMEX MC6-T - Options; Software Options

Options - 33
Options
Software Options
The following software options are available:
• Mobile Security Plus, a solution which ensures the integrity of
calibration data throughout the Beamex ICS solution. This option is also
required in CMX Calibration Software,
• Multi channel Data Logger,
•
Communicator, HART
®
,
•
Communicator, FOUNDATION Fieldbus
tm
, (
1
•
Communicator, PROFIBUS PA
tm
, (
1
•
Drivers for External Controllers (Pressure and Temperature) (
2
and
• Special Temperature Sensors.
Note: The software options activated in MC6-T can be found
in MC6-T's Settings main function. Select About option and
browse to page 3. Whether the communication hardware
needed for fieldbus communication is installed or not, can be
found in MC6-T's Settings main function. Select About option
and see page 1.
(
1
Requires that communicating hardware is installed into MC6-T. Please
contact Beamex.
(
2
When necessary, a connection cable is shipped when the software
option is bought.