118
Settings
Connecting devices (Traffic Pro)*
X Select the device to be connected from
the device list.
Press the rotary control/push button .
X Select <HV to connect or 1R not to
connect.
If
<HV is selected, the Traffic Pro will
attempt to establish a connection to the
required device.
You may be required to enter a password
depending on which device you are
trying to connect.
X Enter the password by rotating/
pressing the rotary control/push
button .
X Select the symbol from the
input menu.
or
X press the rotary control/push button
and hold for at least 2 seconds.
A connection will be established to the
required device. The device has now
been now authenticated.
If it was not possible to establish a
connection, the Traffic Pro will notify
you of this on the display.
Notes:
• A device that has not yet been
connected is identified by the symbol
or . A device which is already
connected is identified by the
symbol.
• If no devices have yet been stored in
the device list
1R %7 GHYLFHV will be
displayed. You can then start a search
for Bluetooth devices as described in
“Searching for Bluetooth devices*”
auf Seite 122.
Note:
You will find further information on
this in the instructions for the device
which you are trying to connect.
For some devices a fixed password has
been specified by the manufacturer.
Enter this password. With other devices
you can choose a number code with 1 -
16 digits. This code must be entered in
the Traffic Pro and the device to be
connected.
7037
Note:
If a different device was already
connected, this will be disconnected.
7038
*Only available for the Traffic Pro with Bluetooth® wireless technology.
To Next Page
Loading...
