Becker Traffic Pro 7945 - Points of Interest (POI) Selection

39
Navigation mode
Point of interest
You can select a POI as a main destina-
tion or a stopover.
POIs include petrol stations, airports or
hospitals, for example.
X In the Navigation main menu, select
the
6SHFLDO'HVW entry.
X Confirm your selection by pressing
the rotary control/push button .
or if route guidance is already active
X In the navigation status display, press
the rotary control/push button .
The Options menu appears.
X Select the 6WRSRYHU entry.
X Confirm your selection by pressing
the rotary control/push button .
X Select the 6SHFLDO'HVW entry.
X Confirm your selection by pressing
the rotary control/push button .
The POI menu appears.
X Turn the rotary control/push button
to select one of the following options:
,QYLFLQLW\RIORFDWLRQ,
,QFRXQWU\,
,QYLFLQLW\RIGHVWLQDWLRQ or
,QSODFH
X Confirm your selection by pressing
the rotary control/push button .
•
,QYLFLQLW\RIORFDWLRQ
You can select a POI in the vicinity of
the vehicle. When you make your
selection, the unit will tell you in
which direction the POI is located and
how far away it is.
•
,QFRXQWU\
You can select a POI for the selected
country from a range of national POI
categories.
•
,QYLFLQLW\RIGHVWLQDWLRQ
You can select a POI in the vicinity of
the destination.
•
,QSODFH
You can select a POI in a specific
town.
2037
2038
2039
2040
Note:
The ,QYLFLQLW\RIGHVWLQDWLRQ entry can only
be selected if route guidance is active.