Becker Traffic Pro 7945 - Memory Card; Removing a Micro-Drive;Memory Card

85
Media mode
Inserting a micro-drive/memory card
The slot for micro-drive/memory cards is
located underneath the removable control
panel on the Traffic Pro or underneath the
cover.
X Remove the control panel as described
in “Removing/Inserting the control
panel” on page 15.
X Remove the cover as described in
“Inserting/Removing the cover” on
page 16.
X Insert the micro-drive/memory card
into the visible slot on the right-hand
side.
X Push the micro-drive/memory card
carefully into the slot.
This pushes the eject button located
above and to the left of the slot out-
wards.
X Reinsert the cover as described in
“Inserting/Removing the cover” on
page 16.
X Reinsert the control panel as described
in “Removing/Inserting the control
panel” on page 15.
The micro-drive/memory card is now
ready for operation and, if MP3 tracks
appear on the micro-drive/memory card,
the first track in the first directory is
played automatically.
If the content of the micro-drive/mem-
ory card has not been changed since it
was last inserted, playback begins with
the last track played.
Removing a micro-drive/memory card
X Remove the control panel as described
in “Removing/Inserting the control
panel” on page 15.
X Remove the cover as described in
“Inserting/Removing the cover” on
page 16.
X Press the eject button located to the
top left of the slot.
X The micro-drive/memory card is
pushed forwards out of the slot.
X Pull the micro-drive/memory card out
of the slot.
X Reinsert the cover as described in
“Inserting/Removing the cover” on
page 16.
X Reinsert the control panel as described
in “Removing/Inserting the control
panel” on page 15.
Notes:
The memory card/micro-drive can only
be inserted in one direction. The reverse
of the memory card/micro-drive points
to the left.