Becker Traffic Pro 7945 - Navigation Settings Configuration; General Navigation Settings; Traffic Announcements Settings; ETA Calculation Settings

55
Navigation mode
Settings
You can make various settings for navi-
gation in the settings.
X In the Navigation main menu, select
the
6HWWLQJ entry.
X Confirm your selection by pressing
the rotary control/push button .
The Settings menu appears.
X Turn the rotary control/push button
to select one of the following options:
7UDIILFPHVVDJHV,
$QQRXQFHDUULYDOWLPH,
(7$VHWWLQJ or
8QLWRIPHDVXUH
X Confirm your selection by pressing
the rotary control/push button .
•
7UDIILFPHVVDJHV
You can specify whether or not traffic
announcements should be read out
automatically by the unit and, if so,
which ones.
•
$QQRXQFHDUULYDOWLPH
You can specify whether the calculated
time of arrival should be announced
automatically once the route has been
calculated/recalculated.
•
(7$VHWWLQJ
You can configure the calculation of
the ETA. ETA stands for Estimated
Time of Arrival.
•
8QLWRIPHDVXUH
You can convert the calculation of the
distances from metric (display in metres
and kilometres) to imperial (display in
yards and miles) system and vice versa.
Traffic announcements
You can specify whether or not traffic
announcements should be read out auto-
matically by the Traffic Pro and, if so,
which ones.
X In the Settings menu, select the 7UDIILF
PHVVDJHV
entry.
X Confirm your selection by pressing
the rotary control/push button .
X You may now select $QQRXQFH PHV
VDJHV
, 2QURXWHRQO\ or :DUQLQJVRQO\.
2085
2086
2086
2087