Becker Traffic Pro 7945 - Address Book Entry Creation

37
Navigation mode
• &UHDWHQHZHQWU\
Select this option to create a new entry
in the address book.
•
$PHQGHQWU\
Select this option to add the current
address to an existing entry in the
address book.
Creating a new entry
X Select the &UHDWHQHZHQWU\ entry.
X Turn the rotary control/push button
and then press the rotary control/push
button to select each letter in the sur-
name one after the other.
X In the data entry menu, select the
symbol.
or
X Press the rotary control/push button
and hold it down for at least 2 seconds.
The entry is adopted.
X Turn the rotary control/push button
and then press the rotary control/push
button to select each letter in the first
name one after the other.
X In the data entry menu, select the
symbol.
or
X Press the rotary control/push button
and hold it down for at least 2 seconds.
The address book entry appears.
X Turn the rotary control/push button
and then press the rotary control/push
button to select the
6DYH entry.
A confirmation that the entry has been
saved appears.
X Press the rotary control/push button
.
Adding data to entries
X Select the $PHQGHQWU\ entry.
X Turn the rotary control/push button
and then press the rotary control/push
button to select the entry to which you
wish to add data.
Note:
Please also refer to the description in
“Data entry menus” on page 13.
2030
2031
2032
Note:
If there are more than 10 entries in the
address book, the data entry menu for
locating the required name appears.
2032