Patient Monitor User’s manual
1-1
Chapter 1 General Introduction
1.1 Intended Use
Patient monitors are intended to be used for monitoring, displaying,
reviewing, storing and alarming of multiple physiological parameters including
ECG(3-lead or 5-lead or 12-lead selectable),arrhythmia detection,ST segment
analysis, Heart Rate (HR), Respiration Rate (RESP), Temperature (TEMP),
Pulse Oxygen Saturation (SpO
2
), Pulse Rate (PR), Non-invasive Blood Pressure
(NIBP), Invasive Blood Pressure (IBP),Carbon dioxide (CO
2
), Anesthetic Gas
(AG).
The arrhythmia detection, ST segment analysis only applied to a single adule
patient.
The monitors are to be used in healthcare facilities by clinical physicians or
appropriate medical staff under the direction of physician.
It is not intended for helicopter tansport, hospital ambulance, or home use.
Warning: The monitor is intended for use only by clinical
professionals or under their guidance. It must only be
used by persons who have received adequate training in
its use. Anyone unauthorized or untrained must not
perform any operations on it.