Patient monitor User’s manual
16-2
Select【Trend Group Setup】in the graphic trends window and enter the
Trend Group Setup menu. You can define the name of trend group as required
and add the parameter label requiring displayed.
16.1.2 Selecting Time interval
Select
Tiem【Interval】in the menu which is under the graphic trends
window, and then select an appropriate resolution according to your need.
16.1.3 Browsing Graphic Trends
If needing to browse the graphic trends of this parameter in more time
intervals:
——Select or and shift time scale axis leftwards or rightwards to
browse the graphic trends of this parameter in more time intervals.
——Selecting or and shift time scale axis to the first or last page,
you can browse the graphic trends in the first or the last time interval
——Selecting or , you can shift the trend cursor. The corresponding
time of current cursor position will display above the cursor, and the
parameter value will display left to the graphic trends window. The value
will vary with the shift of trend cursor.
——Select or and turn page up or down to browse the graphic
trends with more parameters within this time interval.
16.1.4 Recording Graphic Trends
Select【Record】in the graphic trends window to record the graphic trends
displaying in the current window.
16.2 Reviewing Tabular Trends
Select the【Main Menu】smartkey→【Review】→【Tabular Trends】
to open the Tabular Trends review window as follows.
To Next Page
Loading...
Need help?
General
