Patient Monitor User’s manual
5-8
5.11 When an Alarm Occurs
Note: When an alarm occurs, you should always check the patient’s
condition first.
Check the alarm message appeared on the screen. It is needed to identify
the alarm and action appropriately, according to the cause of the alarm.
1. Check the patient’s condition.
2. Identify alarming parameter and alarm category.
3. Identify the cause of the alarm.
4. Silence the alarm, if necessary.
5. When cause of alarm has been over, check that the alarm system is
working properly.
You will find the alarm messages for the individual parameter in
Appendix C Alarm message
.
To Next Page
Loading...
