Patient Monitor User’s manual
3-1
Chapter 3 Basic Operations
3.1 Unpacking and Checking
1. Unpacking
Before unpacking, examine the packing case carefully for signs of damage.
If any damage is detected, contact the carrier. If the packing case is intact,
open the package.
2. Remove the monitor and accessories carefully.
3. Keep all the packaging materials for future use in transportation or storage.
4. Check the monitor and accessories
Check the monitor and its accessories one by one in accordance with the
packing list. Check to see if the parts have any mechanical damages. In case
of problems, please contact us or our agent.
Warning:
Keep the packing materials out of children’s reach. Disposal of the
packing materials should observer the applicable waste control
regulations.
The monitor might be contaminated during storage and transport.
Before use, please verify whether the packages, especially the package
of disposable accessories, are intact. In case of any damage, do not
apply it to the patient.
Caution: Please put a monitor onto a horizontal and stable
supporting plane. Avoid putting the monitor in the
locations where it easily shakes or wobbles. Enough space
shall be left around the monitor so as to guarantee normal
ventilation.
Warning: Please ensure the monitor is working under specified
conditions; otherwise, the technical specifications
mentioned in this manual will not be met, thus possibly
leading to damage of equipment and other unexpected
results.
To Next Page
Loading...
Need help?
General
