Patient Monitor User’s manual
5-2
High level alarms: Indicate that the patient is in a life threatening situation
and an emergency treatment is necessary. This is the highest level alarm.
Medium level alarms: Indicate that the patient’s vital signs appear
abnormal and an immediate treatment is required.
Low level alarm: Indicate that the patient’s vital signs appear abnormal and
an immediate treatment may be required.
The levels of some physiological alarms are predefined before the monitor
leaves the factory and can not be changed by users. While some levels of
physiological alarms can be changed by users.
The monitor’s technical alarms are classified into two categories: medium
level and low level.
The levels of technical alarms are predefined before the monitor leaves the
factory and can not be changed by users.
5.3 Alarm Indicators
When an alarm occurs, the monitor will indicate it through the following
means:
Alarm tone: According to alarm level, speaker in the monitor gives alarm
sound in different tone.
Alarm lamp: According to alarm level, alarm lamp on monitor flashes in
different color and speed.
Alarm message: Alarm messages are displayed on the screen.
Flashing numeric: The numeric of parameter in alarm flashes.
Caution: The concrete presentation of each alarm prompt is related to
the alarm level.
5.3.1 Alarm Tone
The different level alarms are indicated by the system in following different
audio ways:
Alarm level Audible prompt
High
“DO-DO-DO------DO-DO, DO-DO-DO------DO-DO”
Medium “DO-DO-DO”
Low “DO-”
To Next Page
Loading...
Need help?
General
