Biotek 405 LS - Page 224

204 | Chapter A: Error Codes
Error
Code
Description Help
6088 Invalid Shake/Soak options selected Service Only.
Contact BioTek TAC.
These codes indicate an unexpected
software error that cannot be fixed
without BioTek support.
6089 Invalid Shake Intensity selected
6090 Invalid Washer buffer selected
6091 Invalid Washer Aspirate Delay value
6092 Invalid Washer Aspirate Travel Rate
value
6093 Invalid Wash Cycles value
6094 Invalid Wash format selected
6095 Invalid Wash Sectors selected
6096 Wash Aspirate Delay value is
required.
6100 This functionality requires the
software to be registered.
You must register the software with
BioTek. Select Help>Register
Software.
405™ Microplate Washer LS