BK Precision 9240 Series - Setting Voltage and Current Values; Checking Model and Firmware Version

Basic Front Panel Operation 25
Voltage Oset
A voltage oset can be added.
The oset can be set from 0 V up to 32.2 V on the 9240 and 0 V up to 60.6 V on the 9241/9242.
1. While in Live Output Display use the softkeys to select Voltage Oset.
2. Select a channel to congure.
3. Use the rotary knob to navigate through the available scales.
Current Oset
A current oset can be added to each output.
The oset can be set from 0 A up to 8.08 A on the 92400 A, from 0 to 4.04 A on the 9241, and 0 to 10.1 A on the
9242.
1. While in Live Output Display use the softkeys to select Current Oset.
2. Select a channel to congure.
3. Use the rotary knob to navigate through the available scales.
3.3 Check Model and Firmware Version
The rmware version, model, and serial number can be veried by entering the security settings. Press button
then use the soft keys to select Utilities > Help > System Info to view model and rmware information.
3.4 Setting Voltage and Current
Follow the steps below to set the output voltage or current. The values can be entered using the numeric keypad or the
rotary knob.
1. Using the keypad: Use the soft keys to select the channel VSET or ISET settings beneath channel view on
the display. Then use the numeric keypad to input the voltage or current value then press to conrm.
2. Using the rotary knob: Use the soft keys to select the channel VSET or ISET settings beneath the channel
view on display. Then turn the knob clockwise to increment or counter-clockwise to decrement the value. Use the
below the rotary knob to move the cursor. Press the knob in to conrm.