BK Precision 9240 Series User Manual

List Mode 33
Load from USB
Load a previously saved list from a USB to selected List Number.
Use the rotary knob to navigate through the le paths of the USB. Use the button to expand folders.
Once the desired location has been found select Load by pressing the softkey furthest to the left.
Figure 5.4 Load from USB
Note:
The list must be saved/overwritten at the selected list number location before it is able to be assigned.
5.2.1 List Number
Select a list program from the internal memory.
Use the numeric keypad or rotary knob to select a list (0 to 9).
Press the button to assign the list.
5.2.2 Next
Set the next list program to run after the current list elapse.
a. To make a list run continuously and indenitely, set Next to the same number as List Number.
b. To run dierent list sequences continuously, set Next to each other.
Example
Set Next on List 1 to 2.
Set Next on List 2 to 1.

BK Precision 9240 Series Specifications

General

Brand	BK Precision
Model	9240 Series
Category	Power Supply
Language	English