BK Precision 9240 Series User Manual

Save/Recall 67
Use the rotary knob to navigate through the le paths of the USB. Use the button to expand folders.
Once the desired location has been found press Load.
The settings will be recalled after a short delay.
Figure 10.4 Recall from USB
10.3 Power-On Settings
Load previously saved output parameters on power-on.
O
To turn o Power-On Mode:
Press the button then use the soft keys to select Power-On Settings > Power- On Mode > O.
Last
To set the output parameters to the previous parameters before powering-o the instrument: Press the button
then use the soft keys to select Power-On Settings > Power- On Mode > Last.
User
To set the output parameters previously saved parameters:
• Press the button then use the soft keys to select Power-On Settings > Power- On Mode > User.
• Press the button then use the soft keys to select Power-On Settings > User Settings.
• Use the numeric keypad or the rotary knob to assign an address (0 to 9).
To save settings see 10.1.

BK Precision 9240 Series Specifications

General

Brand	BK Precision
Model	9240 Series
Category	Power Supply
Language	English