Brady BradyPrinter S3100 User Manual

BradyPrinter S3100 Sign & Label Printer User’s Manual 10
Unpacking and Setting up Printer
Setting up the Printer
4. Place ribbon cartridge with ribbon over print head (product label toward
machine), then snap into place.
5. Close and latch the ribbon cover.
6. Close the enclosure cover.
7. If printer was asleep, press . The system detects the installed supplies,
sets media and ribbon colors, indicates the label dimensions and the amount
of remaining supplies.
4

Brady BradyPrinter S3100 Specifications

General

Print Technology	Thermal Transfer
Resolution	300 dpi
Application	Industrial Labeling
Max Print Width	4 inches
Connectivity	USB, Ethernet
Display	Color touchscreen
Power Supply	100-240V AC, 50/60Hz