Brady BradyPrinter S3100 - Serial Objects

BradyPrinter S3100 Sign & Label Printer User’s Manual 42
Adding Objects
Serial Objects
Serial Objects
Serialization lets you create labels that contain number or letter sequences that
print as multiple labels at print time.
Note: This procedure applies only when not using a template. If using a template,
see “Converting Text or Barcode to Variable Data” on page 64.
To add a serial object:
1. Touch the Add Object button.
2. In the Add Object panel, touch the Serial & Date/Time button.
3. In the Serial & Date/Time dialog box, select either:
• Serial Text
• Serial Barcode
4. In the Serial dialog box, type or select values for setting the serial attributes
(the Sample area will immediately display an example of the selections):
• Starting Value : Starting label value for the serialization to begin. Can use
alpha or numeric (positive or negative) values.
•
Ending Value : Ending label value for the serialization to stop (not used if Total
Number of labels is entered). Can use alpha or numeric (positive or negative)
values.
•
Change by : Number that the serial value increments or decrements for each
label. Can use positive or negative values.
•
Total number : Number of labels that will be printed (not used if Ending Value
is entered).
•
Before serial : Prefix (text or spaces) before the serial value.
•
After serial : Suffix (text or spaces) after the serial value.