Brady BradyPrinter S3100 - Set Barcode Defaults

BradyPrinter S3100 Sign & Label Printer User’s Manual 23
Setting up the System Defaults
Set Barcode Defaults
Set Barcode Defaults
To set the barcode defaults:
1. Touch the Menu button.
2. In the menu list, touch the Setup button.
3. In the Setup menu, touch the Barcode Defaults button.
4. In the Barcode Defaults menu, change any of the following options:
•Symbology
• Check Characters
•Ratio
•Density
• Human readable text
5. When done, touch the OK button.