BradyPrinter S3100 Sign & Label Printer User’s Manual
84
Cleaning the Printer
Cleaning the Cutter Blade
Cleaning the Cutter Blade
Note: When cleaning the cutter, you should also clean the media and cutter
sensors.
Materials Required
•
BradyPrinter
S3100 Cleaning Kit (Cat # B31-CCT)
• Isopropyl Alcohol
• Cutter Cleaning Tool (included in cleaning kit)
To clean the cutter:
1. Remove power and media from the printer (see “Removing Power and Media
from Printer” on page 81).
2. Squeeze the two yellow cutter tabs [7] to release the cutter. The cutter
mechanism and exit chute [8] will slide down behind the ribbon cover.
3. Fill the plastic bottle from the cleaning kit with isopropyl alcohol.
To Next Page
Loading...
