BradyPrinter S3100 Sign & Label Printer User’s Manual
116
Pipe Markers
Save, Open or Delete a Pipe Marker Label
Save, Open or Delete a Pipe Marker Label
You can only save, open or delete pipe marker labels from the Pipe Marker
application.
To open the pipe marker application:
1. From the Home page, touch the Pipe Markers button.
- or -
Touch the More Label Types button, then touch the Pipe Markers button.
To save a pipe marker:
Note: This procedure assumes that a pipe marker has already been created.
To create a pipe marker, see “Create Pipe Marker Labels” on page 109.
1. With the pipe marker displayed in the Pipe Marker control panel, touch the
Menu button.
2. Touch the Save File button.
3. Select a category, or if desired, create a new category.
4. In the File name field, enter a file name for the pipe marker.
5. Touch the OK button . The pipe marker is saved.
To open an existing pipe marker:
1. From the Pipe Marker control panel, touch the Open Saved File button.
2. In the Open File dialog, select a category.
3. Select a label. The file immediately opens in the pipe marker editor.
4. To edit the pipe marker, touch the Edit Pipe Marker Data button.
To delete a pipe marker:
1. In the Pipe Marker control panel, touch the Menu button.
2. Touch the Delete File button.
3. In the Delete File dialog, select the category where the label is located.
4. Select the label you want to delete.
5. When prompted to delete the file, touch Yes. Selecting No will cancel the
operation.
To Next Page
Loading...
Need help?
General
