BradyPrinter S3100 Sign & Label Printer User’s Manual
53
Working with Text
Entering Special Characters
Entering Special Characters
Use this procedure to enter text characters, such as accented characters or
special characters, that are not present on the physical keyboard.
To enter special characters:
1. In the Editor, choose a text object then touch the Special Characters button
. A list of available characters is displayed.
Note: The available characters depend on the font you are using.
2. Select the character(s) you want to enter (you can select more than one
character at a time). The selected character(s) immediately display in the
Characters to Insert area.
Notes:
• If you want to mix special and normal characters, you can also type into
the Characters to Insert area.
• Press Up or Down arrows to scroll through the available
characters.
3. To delete characters from the area, press Backspace or highlight the
characters and press Delete.
4. When you are done choosing special character(s), touch the OK button .
The special characters are inserted in the active text object at the current
cursor position.
To Next Page
Loading...
