Brady BradyPrinter S3100 - Page 57

BradyPrinter S3100 Sign & Label Printer User’s Manual 40
Adding Objects
Shapes
1. Touch the Editor screen where you want the shape to be added.
2. In the Add Object control panel, touch the Graphic button.
3. In the Select Graphic dialog box, under Category, touch Shapes.
4. In the Shapes area, touch the desired shape.
5. The shape is displayed in the Editor. Decide whether you want the shape filled
in or outlined. The following image shows an outlined shape on the left and a
filled in shape on the right.
• To fill in the shape touch the Fill button.
• To outline the shape, touch the
Outline button.