Brady BradyPrinter S3100 User Manual

BradyPrinter S3100 Sign & Label Printer User’s Manual 61
Handling Objects
Sizing Objects
3. Touch a handle and drag on the touch screen to resize the object:
• Proportionally : Drag the corner handle to resize the object proportionally.
•
Non-Proportionally (Width) : Drag the right-side handle to stretch or shrink
the object width in the direction of the handle only.
•
Non-Proportionally (Height) : Drag the bottom handle to stretch or shrink
the object width in the direction of the handle only.
4. To hide the sizing handles, touch the Size button again.
Set Object Size
Use this procedure if you want to size an object by setting the object height and
width.
To size an object using object dimensions:
1. In the Editor, select the object you want to resize.
2. In the Control Panel, touch the More Options button to navigate to
the Exact Size & Position option.
3. Touch the Exact Size & Position button.
4. To maintain the object proportions, select the Keep width-height ratio check
box.
5. Type a value for:
•Object width
• Object height
6. When done, touch the OK button . The object is displayed at the
specified size.
Note: If the values entered result in the object being positioned outside the
printable area, the system resizes and repositions the object to fit on the label.

Brady BradyPrinter S3100 Specifications

General

Print Technology	Thermal Transfer
Resolution	300 dpi
Application	Industrial Labeling
Max Print Width	4 inches
Connectivity	USB, Ethernet
Display	Color touchscreen
Power Supply	100-240V AC, 50/60Hz