Brother MFC-J6520DW

3-109
Confidential
9.53 Flushing Box
(1) Release the two Hooks and remove the Flushing box.
Assembling Note: If you replace the flushing box (without replacing the main PCB
ASSY), reset the flushing count, using the procedure given in
Chapter 4, Section 1.14 "Reset purge and flushing counts."
It is also recommended that the ink absorber box be replaced and
the purge count be reset as necessary since the purge count may
approach the upper limit.
Fig. 3-127
Hook
Hook
Flushing box
Lower cover