Brother MFC-J6520DW

5-55
Confidential
1 Real-time clock (RTC) check result
*4
26 Printed page count for paper size and paper type
*1
2 RTC backup check result
*4
OK: Backup completed, NG: Backup failed
27
Total page count for duplex printing/
Jam count in duplex printing/Roller cleaning count
3 Model code 28 Total page count in duplex printing
4 Country code 29 Duplex printed page count for recording paper
size and type
*1
5 Checksum of WSW, PSW, USW, and FSW
*4
30 Total printed label count/Label jam count
6 Version of main firmware 31 Total print count in printing via manual feed slot/
Paper jam count
7 Version of boot firmware
*4
32 CIS type
(currently in use, parameters saved in firmware)
(for two companies if two companies used)
8 Serial number 33 ADF scanning count/FB scanning count/
ADF jam count/FAX scanning count/
Scanner count
9 Head property information/
Head voltage adjustment value/
Existence of mismatched calibration data in
head calibration data calibration ratio
34 Home positioning error code of the CIS unit/
Home positioning detection log data
*4
10 CIS type/Engine type/LCD type 35 Purge count/Sensor purge count
*7
/
Wipe count/Black flushing count/Color flushing
count/Flushing count error detection count
11 PictBridge information
*4
36 Purge count (black)
*2
12 Ink drop count after replacement of ink cartridge 37 Purge count (color)
*2
13 Ink drop count after detection of "Ink Low" 38 Total power-ON time
14 Ink drop count for droplets jetted out onto the
platen
*4
39 Power-ON count
15 Total ink drop count from a new head including
flushing
40 Machine error history
(Error code: Date of occurrence: Machine
temperature °C at the time of occurrence)
16 Ink drop count via cleaning cycle after
replacement of ink cartridge
41 Communications error history
(Error code: Date of occurrence)
17 Ink cartridge change count high-yield, standard
yield
42 Initial purge log
*4
(FF: Normal end)
18 Ink cartridge detection failure count
(Cannot Detect display count)
43 Machine information backup file version
*4
19 Ink drop count of ink cartridge after previous
replacement
44 Sensor status
*3
20 Ink drop count after detection of “Ink Low” at the
previous replacement of ink cartridge
45 Ink cartridge type loaded in each slot
*5
Ink remaining state (0: OK 1:NG)
21 Ink drop count due to cleaning of ink cartridge
after previous replacement
46 Executed maintenance codes
*4
22 Ink drop count at ink remaining failure 47 Executed special maintenance codes
*4
23 Total printed page count/
Printed page count for previous month/
Printed paper jam count
48 LCD error
*4
24 Printed page count for paper size/
Printed page count for A3 and ledger/
Printed page count except for A3 and ledger
49 Reset count *
6
/
Power-ON duration at the time of last reset
(Total power-ON hours)
25 Page count in by printing method 50 Operation start date of the product
(Current date when the user operates the
product first after unpacking)